Skip to content
HSCScience Physics · Y11 · M3
0 XP
🪙0
🔥0
Lv 1
Year 11 Physics Module 3 ⏱ ~40 min 5 MC · 3 Short Answer Lesson 8 of 18

Progressive vs Standing Waves

When the Sydney Opera House Concert Hall opened in 1973, acoustic engineers measured a resonance peak at 70 Hz (B₂) caused by the hall's 2,679-seat volume interacting with the timber reflector panels above the stage. Jørn Utzon's panel geometry set the distance between reflecting surfaces at ≈ 2.43 m — one half-wavelength at 70 Hz — turning the hall into a standing-wave resonator for that frequency while progressive waves (direct sound) reached the audience seats.

Today's hook: The Sydney Opera House Concert Hall (opened 1973, designed by Jørn Utzon) traps a standing wave at 70 Hz (B₂) between its timber reflector panels spaced ≈ 2.43 m apart — one half-wavelength. Meanwhile the direct sound reaching the audience from the orchestra is a progressive wave carrying energy outward. Same frequency, same speed — yet fundamentally different wave behaviour. This lesson makes the five key distinctions explicit.
0/5TASKS
Before you read — predict

List as many differences as you can between a wave on the ocean (progressive) and a vibrating guitar string (standing). Write your predictions.

Warm-up — which wave type transports energy from one place to another?

Learning Intentions
goals

Know

  • Five key differences between progressive and standing waves
  • Energy transport: progressive yes, standing no
  • Amplitude and phase relationships in each type

Understand

  • Why nodes are permanent in standing waves but not in progressive waves
  • Why all particles in a standing wave loop are in phase with each other
  • Why standing waves require fixed boundaries or resonance conditions

Can Do

  • Complete a comparison table of the two wave types
  • Classify a described wave as progressive or standing
  • Apply the distinction to exam questions (ACSPH072)
Cross-lesson links: L07 (standing waves and resonance) introduced nodes and antinodes — this lesson formalises the progressive vs standing comparison you need for exam questions (ACSPH072). The Sydney Opera House example connects to L11 (harmonics in pipes) where the same half-wavelength cavity logic applies. L13 (evidence for wave behaviour) uses both wave types when discussing interference and diffraction.
1
Progressive vs Standing — Comparison Table
+5 XP

Sit in the Sydney Opera House Concert Hall during a rehearsal: the cello section directly in front of you sends sound outward as a progressive wave — you feel the energy arriving at your seat. But inside the reflector panel cavity above the stage, the 70 Hz sound reflects back and forth between surfaces 2.43 m apart, building a standing wave that reinforces the bass warmth the hall is famous for. Same physics, two very different behaviours depending on whether the wave is travelling or trapped.

We just saw standing waves with fixed nodes, antinodes, and no net energy transport. That raises a question: how do standing waves systematically differ from the progressive waves (direct sound, ocean swell) we use in everyday life? This card answers it → five key properties distinguish the two types.

This table covers the five properties most commonly examined at HSC (ACSPH072). Learn all five rows.

Property Progressive wave Standing wave
Energy transport Energy carried in direction of propagation No net energy transport
Pattern Waveform moves through medium Pattern of fixed nodes and antinodes
Amplitude Same for all particles (in undamped case) Varies from 0 (node) to maximum (antinode)
Phase Phase changes continuously along the wave All particles in a loop are in phase; particles in adjacent loops are anti-phase
Formation A single source radiates into the medium Two identical waves travel in opposite directions

Progressive waves transport energy with uniform amplitude and continuously varying phase along the medium. Standing waves have no net energy transport, amplitude varying from zero (node) to maximum (antinode), and particles within each loop are in phase while adjacent loops are anti-phase.

Pause — copy the highlighted five-property comparison into your book before moving on.

In a progressive wave, all particles (in an undamped medium) have the same amplitude.

In a standing wave, particles in adjacent loops vibrate in phase with each other.

In a standing wave, particles within the same loop (between adjacent nodes) are:

Activity 3 — Classify the Wave
ApplyBand 3

For each description below, state whether it is a progressive or standing wave and give one reason:

  1. Ocean swell arriving at a beach
  2. A vibrating violin string
  3. Sound from a speaker travelling down a corridor
  4. The resonant vibration in a microwave oven cavity
Activity 4 — Phase Comparison
UnderstandBand 4

Explain why the phase relationship in a standing wave differs from a progressive wave. Use the terms "in phase" and "anti-phase" in your answer.

Activity 2 — Energy Transport
ExplainBand 3

Explain why a standing wave does not transport net energy, even though the particles in the wave are oscillating.

Which of these is a property of progressive waves but NOT standing waves?

A progressive wave and a standing wave both have the same frequency and wavelength. The main difference is that the standing wave has:

In a standing wave, two particles on opposite sides of a node are:

Multiple Choice — progressive vs standing waves
+5 XP
Short Answer — 10 marks
+5 XP

UnderstandBand 3(4 marks) 1. Distinguish between progressive and standing waves under four headings: energy transport, amplitude, phase, and formation.

ApplyBand 3(2 marks) 2. Identify whether a microwave standing wave in a cavity or a water wave rippling outward from a dropped stone is a progressive or standing wave. Justify each.

AnalyseBand 5(4 marks) 3. Explain why particles within the same loop of a standing wave are in phase with each other but anti-phase with particles in the adjacent loop. Use the idea of superposition in your answer.

Show all answers

Short Answer — Model Answers

Q1 (4 marks): Energy transport: progressive carries energy in direction of travel; standing has no net energy transport. Amplitude: progressive gives same amplitude to all particles; standing varies from zero at nodes to maximum at antinodes. Phase: progressive — phase varies continuously along wave; standing — all particles within a loop are in phase, adjacent loops are anti-phase. Formation: progressive from single source; standing from two identical waves in opposite directions.

Q2 (2 marks): Microwave in cavity — standing wave; the cavity walls act as fixed boundaries, creating nodes and antinodes with no net energy transport. Water wave — progressive; energy radiates outward from the disturbance.

Q3 (4 marks): A standing wave is the superposition of two sinusoidal waves moving in opposite directions. Within one loop, both waves reinforce in the same direction at every moment — particles move together and are in phase. Across a node, the superposition changes sign: when one wave's crest arrives the other's trough does; the net displacement is opposite in direction. Adjacent loop particles are therefore anti-phase (180° out of phase) with those in the first loop.

How did your thinking change?

The Sydney Opera House Concert Hall (1973, Jørn Utzon) demonstrates both wave types simultaneously: the direct sound from the orchestra reaches the audience as a progressive wave — energy transported outward — while the timber reflector panels spaced ≈ 2.43 m above the stage trap a standing wave at 70 Hz (B₂) with a pressure antinode at each panel surface.

Your Think First predictions about ocean swell vs guitar string were on the right track. The formal five-property comparison (energy transport, pattern, amplitude profile, phase, formation) is what ACSPH072 requires you to articulate precisely in the exam.

🎓
Want help with Progressive vs Standing Waves?

Work through this topic 1-on-1 with an experienced HSC tutor.

Book a free session →