Skip to content
HSCScience Physics · Y11 · M3
0 XP
🪙0
🔥0
Lv 1
Year 11 Physics Module 3 ⏱ ~40 min 5 MC · 3 Short Answer Lesson 7 of 18

Standing Waves and Resonance

On 7 November 1940, the Tacoma Narrows Bridge (L = 853 m, opened July 1940) collapsed after wind at ~67 km/h created periodic vortices at 0.2 Hz — exactly matching the bridge's natural frequency (period 5 s). Resonance drove the deck amplitude from ~0.6 m to 8.8 m in under an hour before the structure failed. The event redefined bridge engineering worldwide.

Today's hook: On 7 November 1940, the Tacoma Narrows Bridge (L = 853 m) collapsed after wind created periodic vortices at 0.2 Hz — matching the bridge's natural frequency exactly. Resonance drove the deck to 8.8 m amplitude in under an hour. The physics is two identical waves (incident + reflected) forming a standing wave with fixed nodes and oscillating antinodes. When the driving frequency locks onto the natural frequency, energy pours in with every cycle.
0/5TASKS
Before you read — predict

A guitar string is plucked. The ends are fixed. What determines which frequencies the string can vibrate at? Write your prediction.

Warm-up — in a standing wave, the points of zero displacement are called:

Learning Intentions
goals

Know

  • Standing waves form when two identical waves travel in opposite directions
  • Nodes are points of zero displacement; antinodes are maximum displacement
  • Resonance: large amplitude when driving frequency = natural frequency

Understand

  • How superposition creates a fixed node/antinode pattern
  • Why standing waves do not transport energy
  • Why resonance can cause catastrophic failure

Can Do

  • Draw and label standing wave diagrams
  • Identify nodes and antinodes
  • Explain resonance in mechanical systems
Key Terms
vocab
Standing waveA wave pattern formed by superposition of two identical waves travelling in opposite directions; nodes and antinodes do not move.
NodeA fixed point of zero displacement in a standing wave pattern.
AntinodeA fixed point of maximum displacement (amplitude) in a standing wave pattern.
ResonanceLarge-amplitude response when a driving frequency matches a system's natural frequency.
Natural frequencyThe frequency at which a system oscillates when left undisturbed after a single disturbance.
Cross-lesson links: L06 (diffraction) showed how waves behave at gaps; standing waves form when reflected waves superpose with incident waves after passing through or reflecting from boundaries. L08 compares progressive and standing waves directly. L11 applies standing wave harmonics quantitatively to strings and pipes, building on the node/antinode geometry introduced here.
Misconceptions to fix
✗ Wrong: Standing waves transport energy just like progressive waves.
✓ Right: Standing waves do not transport energy — the energy oscillates between KE and PE at each point, but there is no net energy flow.
✗ Wrong: Resonance only occurs in musical instruments.
✓ Right: Resonance occurs in any mechanical system — bridges, buildings, MRI machines, atomic nuclei.
1
Formation of Standing Waves
+5 XP

On 7 November 1940, at 11:00 am, the Tacoma Narrows Bridge deck began twisting violently. Wind vortices at exactly 0.2 Hz were adding energy to the deck with every cycle. The deck's reflected oscillation met the next incoming impulse in phase — each cycle the amplitude grew a little more, from 0.6 m to 8.8 m in under an hour. What the engineers watching from shore were seeing was a standing wave pattern with nodes near the towers and an antinode at mid-span.

When two waves of identical frequency, amplitude and speed travel in opposite directions along the same medium, their superposition produces a standing wave. The nodes remain permanently stationary; the antinodes oscillate with maximum amplitude. The distance between adjacent nodes (or adjacent antinodes) is $\lambda/2$.

Node-antinode spacing
Adjacent node to adjacent node = $\lambda/2$  ·  Node to adjacent antinode = $\lambda/4$

A standing wave forms when two identical waves travel in opposite directions and superpose; nodes (zero displacement, permanent) are separated by $\lambda/2$, and antinodes (maximum displacement) sit midway between nodes. Standing waves do not transport net energy.

Pause — copy the highlighted definition and spacings into your book before moving on.

The distance between two adjacent nodes in a standing wave equals:

2
Resonance in Mechanical Systems
+5 XP

We just saw that standing waves have fixed nodes and antinodes with no net energy transport. That raises a question: what happens if an external periodic force continuously feeds energy into a standing wave at exactly the right frequency? This card answers it → resonance: amplitude grows dramatically when the driving frequency matches the natural frequency.

Every mechanical system has one or more natural frequencies at which it oscillates after being disturbed. When an external periodic driving force is applied at the same frequency, energy is continually added in phase with the oscillation — the amplitude grows dramatically. This is resonance.

At resonance the energy input matches energy losses, so the system can sustain large, steady oscillations. If damping is low and the driving force is not removed, amplitude can grow until the system fails (as in the Tacoma Narrows bridge).

Resonance occurs when an external driving frequency equals a system's natural frequency, causing the amplitude to grow dramatically as energy is added in phase each cycle. Insufficient damping can lead to structural failure (Tacoma Narrows Bridge, 1940).

Add the highlighted resonance definition to your notes before the check below.

Standing waves carry energy in the same direction as the component waves.

Resonance occurs when the driving frequency equals the natural frequency of a system.

Activity 3 — Standing Wave Diagram
ApplyBand 3

Sketch two full standing wave patterns for a string fixed at both ends: (a) the fundamental (1 loop), (b) the second harmonic (2 loops). Label all nodes and antinodes for each.

Activity 2 — Resonance Example
UnderstandBand 3

Describe one real-world example of resonance. Explain: (a) what the natural frequency belongs to, (b) what the driving force is, (c) what happens to amplitude at resonance.

Activity 4 — Node Counting
ApplyBand 3

A standing wave is set up on a string 1.2 m long. The pattern has 4 loops. (a) How many nodes are there? (b) How many antinodes? (c) What is the wavelength of the standing wave?

Which of these is the odd one out relating to standing waves?

A string 0.6 m long vibrates in its fundamental mode. The wavelength of the standing wave is:

Resonance occurs when:

Multiple Choice — standing waves and resonance
+5 XP
Short Answer — 10 marks
+5 XP

UnderstandBand 3(3 marks) 1. Explain how a standing wave is formed and identify what is meant by nodes and antinodes.

ApplyBand 4(3 marks) 2. A string of length 0.80 m vibrates with 3 loops. Calculate the wavelength and state how many nodes are present.

AnalyseBand 5(4 marks) 3. Using the Tacoma Narrows Bridge collapse as an example, explain how resonance can cause mechanical failure. In your answer refer to natural frequency, driving frequency, and amplitude.

Show all answers

Short Answer — Model Answers

Q1 (3 marks): A standing wave forms when two waves of identical frequency, amplitude and speed travel in opposite directions and superpose. Nodes are fixed points of zero displacement — the waves always cancel there. Antinodes are fixed points of maximum displacement — the waves always reinforce there.

Q2 (3 marks): $\lambda = 2L/n = 2 \times 0.80/3 = 0.533$ m. Number of nodes = 3 + 1 = 4 nodes.

Q3 (4 marks): The Tacoma Narrows Bridge (1940) had a natural frequency of about 0.2 Hz. Steady wind created periodic vortices (a driving force) matching this frequency. Because the driving frequency equalled the bridge's natural frequency, energy was continuously added in phase — resonance. With insufficient damping, amplitude grew from centimetres to 8.5 m, exceeding the bridge's structural limits and causing collapse.

How did your thinking change?

The Tacoma Narrows Bridge collapsed on 7 November 1940 because wind vortices at 0.2 Hz (period 5 s) matched the bridge's natural frequency exactly. Resonance drove the 853 m deck to 8.8 m amplitude — a standing wave mode with antinodes at mid-span and nodes near the towers. Low damping meant energy input exceeded losses, and the amplitude grew until structural failure.

Your Think First prediction about guitar string harmonics connects directly: the string's fixed ends are nodes, and only frequencies where an integer number of half-wavelengths fits between the ends ($f_n = nv/2L$) are sustained. The Tacoma Narrows bridge obeyed the same standing-wave resonance — just at catastrophic scale.

🎓
Want help with Standing Waves and Resonance?

Work through this topic 1-on-1 with an experienced HSC tutor.

Book a free session →