Skip to content
M
hscscience Ext 2 · Y12
0/100daily goal
0
0
0 due
0
L1 · 0 XP
KJ
Your weak spots
Insights load after your first practice round.
Module 16 · L12 of 16 ~40 min ⚡ +90 XP available

Resisted Motion — Vertical Rising

Throw a ball straight up. Gravity pulls it down; air drag also pulls it down (because drag opposes the upward velocity). Both forces work against the motion, so the deceleration is larger than $g$. This lesson teaches you to set up $\dot v = -g - kv$ (or $-g - kv^2$), integrate to find the time of maximum height and use $v\,dv/dx$ to find the maximum height itself.

Today's hook — A ball is thrown straight up at $u$ m/s and decelerates under both gravity and air resistance. Without solving anything, decide: (a) is the time to reach maximum height greater than, less than, or equal to $u/g$? (b) Is the maximum height greater or less than $u^2/(2g)$? (c) On the way down, does gravity and resistance still both point downward? Check after card 05.
0/5QUESTS
01
Recall — your gut answer first
+5 XP warm-up

A ball is thrown vertically upward with speed $u$ in a vacuum (no drag). Recall: time to max height is $u/g$; max height is $u^2/(2g)$. Now imagine air drag is switched on. Will both of these numbers go up or down? Why?

auto-saved
02
The two moves for vertical rising motion
+5 XP to read

Every rising-with-resistance problem rewards two habits: choose "up positive" and write both downward forces with minus signs, then pick $dv/dt$ for time questions or $v\,dv/dx$ for height questions. Both gravity and drag are negative while $v > 0$ — this is the most-missed sign.

The sign-derivative-target reading: (1) "up" is positive, so $g$ and the drag term both carry minus signs while rising; (2) decide whether the target is time or height; (3) use $dv/dt$ to find time to apex, $v\,dv/dx$ to find height of apex.

Rising (linear drag): $\dfrac{dv}{dt} = -g - kv$  ·  Rising (quadratic): $\dfrac{dv}{dt} = -g - kv^2$  ·  Max height when $v = 0$.

Forces -g, -kv Pick t or x? Set v = 0 at apex Apex: solve t* (or x*) when v = 0
$\dfrac{dv}{dt} = -(g + kv) \;\Rightarrow\; v(t^*) = 0$
Apex is the easy condition
Maximum height occurs when $v = 0$ — both upward motion and any "instant" of pause happen here. Solve $v(t) = 0$ for time to apex; substitute into $x(t)$ for the height.
Drag shortens both time AND height
Compared to vacuum: $t^* < u/g$ (you reach the top quicker) and $H < u^2/(2g)$ (you don't go as high). Drag always strictly reduces apex parameters.
Resistance sign flips on the way down
While rising ($v > 0$), drag $= -kv$ (downward). While falling ($v < 0$), drag points upward. The rising equation $\dot v = -g - kv$ is only valid until $v = 0$.
03
What you'll master
Know

Key facts

  • Rising under linear drag (up positive): $\dot v = -g - kv$
  • Rising under quadratic drag: $\dot v = -g - kv^2$
  • Apex condition: $v = 0$
  • $v\,\dfrac{dv}{dx}$ gives $v$ as a function of position
Understand

Concepts

  • Why both forces are negative while rising
  • Why time to apex and apex height are both smaller than in vacuum
  • Why the rising equation breaks at $v = 0$ (sign flip during fall)
Can do

Skills

  • Integrate $\dot v = -g - kv$ to find $t^*$ when $v = 0$
  • Use $v\,dv/dx$ to find apex height $H$
  • Handle quadratic-drag rising with the standard $\arctan$ form
04
Key terms
Up-positive convention$x$ measured upward from the launch point; $v = dx/dt$. Gravity and (rising) drag are both negative quantities.
Rising equation (linear drag)$\dot v = -g - kv$, valid for $v > 0$. Combines weight and drag, both pointing down.
Rising equation (quadratic drag)$\dot v = -g - kv^2$, valid for $v > 0$. Integrates to an $\arctan$ form for $t$.
Apex (maximum height)The instant when $v = 0$. Time to apex: $t^*$; height of apex: $H = x(t^*)$.
$v\,dv/dx$ formIdentity $dv/dt = v\,dv/dx$. Use to integrate directly from $u$ to $0$ in $v$ while $x$ goes from $0$ to $H$ — gives apex height without going through $t$.
Drag-vs-vacuum comparedWith drag: $t^* < u/g$ and $H < u^2/(2g)$. Both quantities strictly decrease when drag is present.
MEX-M1NESA outcome (Applications of Calculus to Mechanics): solves problems involving vertical motion with resistance, including rising under gravity.
05
Rising under linear drag: $\dot v = -g - kv$
core concept

A particle of mass $m$ is thrown vertically upward at speed $u$. Take $x$ positive upward. Net downward force while rising is weight plus drag: $mg + mkv$. Newton's second law:

$$m\frac{dv}{dt} = -mg - mkv \;\Longrightarrow\; \frac{dv}{dt} = -(g + kv)$$

Separate variables: $\dfrac{dv}{g+kv} = -dt$. Integrate from $v = u$ to $v$:

  • $\dfrac{1}{k}\ln(g+kv) = -t + \dfrac{1}{k}\ln(g+ku)$, giving $g + kv = (g+ku) e^{-kt}$.
  • Solve: $\displaystyle v(t) = \frac{(g+ku)e^{-kt} - g}{k}$.
  • Time to apex: set $v = 0$: $(g+ku)e^{-kt^*} = g \;\Rightarrow\; t^* = \dfrac{1}{k}\ln\!\left(1 + \dfrac{ku}{g}\right)$.

For the height, switch to $v\,dv/dx = -(g+kv)$, separate as $\dfrac{v\,dv}{g+kv} = -dx$, and integrate from $v = u$, $x = 0$ to $v = 0$, $x = H$. The standard split $\dfrac{v}{g+kv} = \dfrac{1}{k} - \dfrac{g/k}{g+kv}$ gives:

$$H = \frac{u}{k} - \frac{g}{k^2}\ln\!\left(1 + \frac{ku}{g}\right)$$
Connecting to the hook. In vacuum, $t^* = u/g$ and $H = u^2/(2g)$. With drag, both decrease: $\ln(1 + ku/g) < ku/g$ for $ku/g > 0$, so $t^* < u/g$. Drag dissipates energy on the way up, so apex altitude is reduced.

Rising (linear drag): $\dot v = -(g + kv)$ — both forces point down while $v > 0$ · $v(t) = \dfrac{(g+ku)e^{-kt} - g}{k}$ · Time to apex: $t^* = \dfrac{1}{k}\ln\!\left(1 + \dfrac{ku}{g}\right) < u/g$ · Apex height: $H = \dfrac{u}{k} - \dfrac{g}{k^2}\ln\!\left(1 + \dfrac{ku}{g}\right) < \dfrac{u^2}{2g}$

Pause — copy the linear-drag rising ODE $\dot v = -(g+kv)$, the time-to-apex $t^* = (1/k)\ln(1+ku/g)$, the apex height $H = u/k - (g/k^2)\ln(1+ku/g)$, and the apex-height inequality $H < u^2/(2g)$ into your book.

Quick check: A particle is projected vertically upward at $u$ m/s and decelerates under $\dot v = -g - kv$. The time $t^*$ to reach maximum height is:

06
Rising under quadratic drag: $\dot v = -g - kv^2$
core concept

We just saw rising under linear drag $\dot v = -(g+kv)$: $v(t)$ decays to rest in finite time $t^* = (1/k)\ln(1+ku/g)$ at height $H < u^2/(2g)$ — drag shortens range. That raises a question: how does the quadratic-drag case $\dot v = -(g+kv^2)$ differ, particularly the integral needed for $t^*$ and $H$? This card answers it → $\int dv/(g+kv^2) = (1/\sqrt{gk})\arctan(v\sqrt{k/g})$ gives $t^* = (1/\sqrt{gk})\arctan(u\sqrt{k/g})$ and $H = (1/2k)\ln(1+ku^2/g)$.

For larger projectiles, drag $\propto v^2$. The equation of motion while rising (up positive) becomes:

$$\frac{dv}{dt} = -(g + kv^2)$$

Separate: $\dfrac{dv}{g+kv^2} = -dt$. Factor out $g$ to put the integrand in $\arctan$ form. Let $\alpha = \sqrt{g/k}$; then:

  • $\displaystyle\int \frac{dv}{g+kv^2} = \frac{1}{\sqrt{gk}}\arctan\!\left(\frac{v}{\alpha}\right) + C$.
  • Time to apex ($v$ goes from $u$ to $0$): $t^* = \dfrac{1}{\sqrt{gk}}\arctan\!\left(\dfrac{u}{\alpha}\right) = \dfrac{1}{\sqrt{gk}}\arctan\!\left(u\sqrt{\tfrac{k}{g}}\right)$.
  • For height, use $v\,dv/dx = -(g+kv^2)$: separate $\dfrac{v\,dv}{g+kv^2} = -dx$. The numerator is half the derivative of the denominator, giving $\dfrac{1}{2k}\ln(g+kv^2) = -x + C$.

Apex height: from $v = u$, $x = 0$ to $v = 0$, $x = H$:

$$H = \frac{1}{2k}\ln\!\left(1 + \frac{ku^2}{g}\right)$$
Common mistake. For rising motion, the drag $-kv^2$ is unambiguously negative ($v^2 > 0$). But the same expression cannot be used on the way down — falling motion has $v < 0$ in this convention, so $-kv^2$ would still oppose nothing useful. Switch to $\dot v = -g + kv^2$ for the descent.

Rising (quadratic drag): $\dot v = -(g + kv^2)$ · $\int \dfrac{dv}{g+kv^2} = \dfrac{1}{\sqrt{gk}}\arctan(v\sqrt{k/g})$ · Time to apex: $t^* = \dfrac{1}{\sqrt{gk}}\arctan\!\left(u\sqrt{\tfrac{k}{g}}\right)$ · Apex height: $H = \dfrac{1}{2k}\ln\!\left(1 + \dfrac{ku^2}{g}\right)$

Pause — copy the quadratic-drag integral $\int dv/(g+kv^2) = (1/\sqrt{gk})\arctan(v\sqrt{k/g})$, $t^* = (1/\sqrt{gk})\arctan(u\sqrt{k/g})$, and $H = (1/2k)\ln(1+ku^2/g)$ into your book.

Did you get this? True or false: in the model $\dot v = -g - kv$ (up positive), the time to reach maximum height is strictly less than $u/g$.

PROBLEM 1 · LINEAR DRAG, TIME TO APEX

A ball of unit mass is thrown upward at $u = 20$ m/s. Air resistance gives $\dot v = -10 - \tfrac12 v$ (taking $g = 10$). Find the time to maximum height.

1
Separate: $\dfrac{dv}{10 + \tfrac12 v} = -dt$, i.e. $\dfrac{2\,dv}{20 + v} = -dt$. Integrate: $2\ln(20 + v) = -t + C$.
Multiplying through to clear the fraction $\tfrac12$ makes the integral less error-prone.
PROBLEM 2 · LINEAR DRAG, MAX HEIGHT

Continuing from Problem 1 ($u = 20$, $g = 10$, $k = \tfrac12$), use $v\,dv/dx$ to find the maximum height reached.

1
$v\dfrac{dv}{dx} = -(10 + \tfrac12 v) = -\tfrac12(20+v)$. Separate: $\dfrac{v\,dv}{20+v} = -\tfrac12\,dx$. Split: $\dfrac{v}{20+v} = 1 - \dfrac{20}{20+v}$.
When the numerator and denominator are both linear in $v$, polynomial-divide first — never integrate a "$v$ over linear" directly.
PROBLEM 3 · QUADRATIC DRAG, APEX HEIGHT

A projectile of unit mass is fired straight up at $u = 30$ m/s. Drag gives $\dot v = -g - \tfrac{1}{90} v^2$ with $g = 10$. Find the maximum height.

1
Use $v\,dv/dx$: $v\dfrac{dv}{dx} = -\left(10 + \dfrac{v^2}{90}\right) = -\dfrac{900 + v^2}{90}$. Separate: $\dfrac{v\,dv}{900 + v^2} = -\dfrac{dx}{90}$.
Factor out the constant from the denominator first — the numerator $v\,dv$ is then exactly half the derivative of $v^2 + 900$.

Fill the gap: For rising motion under quadratic drag, $\dot v = -g - kv^2$, the maximum height is $H = \dfrac{1}{}\ln\!\left(1 + \dfrac{ku^2}{}\right)$.

Trap 01
Getting the sign of drag wrong while rising
With "up positive" and $v > 0$, drag opposes motion so it points down: write $-kv$ (linear) or $-kv^2$ (quadratic). Don't write $+kv$ "because drag is positive in magnitude" — the magnitude is positive, but in the equation it carries a minus.
Trap 02
Re-using the rising equation on the way down
$\dot v = -g - kv$ only describes rising. After the apex, $v < 0$ in the up-positive convention and drag now opposes the downward velocity — i.e. acts upward. The descent equation is $\dot v = -g + kv$ (or $+kv^2$ for quadratic), with care over signs.
Trap 03
Using $dv/dt$ when the question asks for height
"Maximum height" $\Rightarrow$ use $v\,dv/dx$, separate, integrate $v$ from $u$ to $0$ and $x$ from $0$ to $H$. Going through $t$ adds an unnecessary stage and is more error-prone.

Did you get this? True or false: while a ball rises under linear drag with up-positive convention, both gravity and air resistance contribute negative terms to $dv/dt$.

Work mode · how are you completing this lesson?
1

A particle is thrown up at $u = 15$ m/s under $\dot v = -10 - v$ (take $g = 10$, $k = 1$). Find the time to maximum height.

2

For the same setup, find the maximum height using $v\,dv/dx$.

3

Derive the general formula $H = \dfrac{u}{k} - \dfrac{g}{k^2}\ln\!\left(1 + \dfrac{ku}{g}\right)$ from $v\,dv/dx = -(g+kv)$.

4

Quadratic drag: a particle of unit mass has $\dot v = -10 - \tfrac{v^2}{40}$ and $u = 20$. Find the maximum height.

5

For quadratic drag, derive $t^* = \dfrac{1}{\sqrt{gk}}\arctan\!\left(u\sqrt{k/g}\right)$ as the time to reach maximum height, starting from $\dot v = -(g+kv^2)$.

Odd one out: Three of these statements about a ball rising under linear drag (up positive) are correct. Which one is NOT?

11
Revisit your thinking

Earlier you predicted whether drag makes the time-to-apex and the apex height smaller or larger than the vacuum values $u/g$ and $u^2/(2g)$.

Drag strictly reduces both: $t^* = \dfrac{1}{k}\ln(1 + ku/g) < u/g$ and $H = \dfrac{u}{k} - \dfrac{g}{k^2}\ln(1 + ku/g) < \dfrac{u^2}{2g}$. The physical reason: while rising, gravity and drag both point downward, so the deceleration is greater than $g$ alone. After the apex the signs change — the rising equation is only valid for $v > 0$, a subtle but examinable point.

auto-saved
01
Multiple choice
+5 XP per correct · +25 XP all-correct

Pick your answer, then rate your confidence — that tells the system what to drill next. Each retry pulls a fresh mix from the bank.

02
Short answer
ApplyBand 32 marks

Q1. A particle of unit mass is projected vertically upward at $u = 10$ m/s. Resistance gives $\dot v = -g - v$ where $g = 10$. Show that the time to reach maximum height is $t^* = \ln 2$ seconds. (2 marks)

auto-saved
ApplyBand 43 marks

Q2. For the same particle, use $v\,\dfrac{dv}{dx}$ to find the maximum height reached. Compare with the vacuum value $u^2/(2g)$. (3 marks)

auto-saved
AnalyseBand 53 marks

Q3. A projectile of unit mass moves vertically upward with equation $\dot v = -g - kv^2$, initial speed $u$. (a) Show that the time to reach maximum height is $\dfrac{1}{\sqrt{gk}}\arctan\!\left(u\sqrt{k/g}\right)$. (b) Hence find the maximum height in terms of $u$, $g$, $k$. (3 marks)

auto-saved
Comprehensive answers (click to reveal)

Activity answers:

1. $\dfrac{dv}{10+v} = -dt \Rightarrow \ln(10+v) = -t + \ln 25$. At apex $v = 0$: $\ln 10 = -t^* + \ln 25 \Rightarrow t^* = \ln 2.5 \approx 0.916$ s.

2. $\dfrac{v}{10+v} = 1 - \dfrac{10}{10+v}$. From $v=15$, $x=0$ to $v=0$, $x=H$: $H = 15 - 10\ln(25/10) = 15 - 10\ln 2.5 \approx 5.84$ m.

3. $\dfrac{v}{g+kv} = \dfrac{1}{k} - \dfrac{g/k}{g+kv}$. Integrating from $u$ to $0$ and $0$ to $H$ gives $H = \dfrac{u}{k} - \dfrac{g}{k^2}\ln\!\left(1+\dfrac{ku}{g}\right)$.

4. $v\,dv/dx = -(10 + v^2/40)$. After separation $\dfrac{1}{2}\ln(400+v^2) = -x/40 + C$, with $C = \tfrac{1}{2}\ln 800$. Apex: $H = 20\ln 2 \approx 13.86$ m.

5. $\dfrac{dv}{g+kv^2} = -dt$. $\int = \dfrac{1}{\sqrt{gk}}\arctan(v\sqrt{k/g})$. From $u$ to $0$: $t^* = \dfrac{1}{\sqrt{gk}}\arctan(u\sqrt{k/g})$.

Q1 (2 marks): $\dfrac{dv}{10+v} = -dt$, integrate: $\ln(10+v) = -t + \ln 20$ [1]. Apex $v = 0$: $\ln 10 = -t^* + \ln 20 \Rightarrow t^* = \ln 2$ s [1].

Q2 (3 marks): Use $v\,dv/dx = -(10+v)$, split $\dfrac{v}{10+v} = 1 - \dfrac{10}{10+v}$ [1]; integrating from $v=10$, $x=0$ to $v=0$, $x=H$: $H = 10 - 10\ln 2 \approx 3.07$ m [1]. Vacuum: $u^2/(2g) = 5$ m, so drag reduces apex by $\approx 1.93$ m [1].

Q3 (3 marks): (a) $\dfrac{dv}{g+kv^2} = -dt$, integrate using $\int \dfrac{dv}{g+kv^2} = \dfrac{1}{\sqrt{gk}}\arctan\!\left(v\sqrt{k/g}\right)$, evaluated from $u$ to $0$ gives $t^* = \dfrac{1}{\sqrt{gk}}\arctan\!\left(u\sqrt{k/g}\right)$ [1]. (b) Use $v\,dv/dx = -(g+kv^2)$; integrate $\dfrac{v\,dv}{g+kv^2}$ as $\dfrac{1}{2k}\ln(g+kv^2)$ [1]; evaluate from $v=u$, $x=0$ to $v=0$, $x=H$: $H = \dfrac{1}{2k}\ln\!\left(1 + \dfrac{ku^2}{g}\right)$ [1].

01
Boss battle · The Apex Tracker
earn bronze · silver · gold

Five timed questions on rising motion with linear and quadratic drag — time to apex, apex height, and the all-important sign of resistance. Beat the boss to bank a tier — gold (90% + speed), silver (75%), or bronze (50%). Replays welcome.

⚔ Enter the arena
02
Science Jump · platform challenge

Climb platforms by answering quick mechanics questions. Lighter alternative to the boss.

Mark lesson as complete

Tick when you've finished the practice and review.

🎓
Want help with Resisted Motion — Vertical Rising?

Work through this topic 1-on-1 with an experienced HSC tutor.

Book a free session →